Voltage Controlled Oscillator - Jack Version

Lin Kbd CV In jack allows for 1 volt/ octave control of the oscillator root frequency.

The exponential amplifier is incorporated into the VCO module.

Exp Kbd Out jack allows for the exponential CV that controls the VCO to be "tapped" and used for a control voltage elsewhere in the system.

Master Tune allows for approximately +/- 1 octave continuous adjustment of the oscillator root frequency.

Mod In jack provided for an oscillator modulation source CV input.

Mod Amount control for variable control of the modulation CV effect on the oscillator frequency.

Simultaneously available Triangle, Square and Sawtooth waveform outputs.

Master Octave switch transposes the oscillator up or down 1 octave.

Square out has an independent switch that drops the square wave down -1 or -2 octaves from the triangle output frequency.

Sawtooth has an independent switch that raises the sawtooth frequency up 1 octave from the triangle output frequency.

The octave switches on the individual waveforms allow for up to a 4 octave spread of waveform outputs from a single oscillator. All in sync and in tune with each other.